Hair Styling Wax PCM-01-08

Author Image

By: TOM BRANNA

Editor

Hair Styling Wax PCM-01-08
Ingredients
%

Phase A-1

  • DI water
  • 70.000

Phase A-2

  • Carbopol Ultrez-21 (Lubrizol (Protameen))
  • 0.250

Phase B

  • Protacide NA2-P (Protameen)
  • 0.050
  • dl-Panthenol (Protameen)
  • 0.200
  • Glycerin, 99% (Protameen)
  • 2.000

Phase C

  • Anhydrous Protalan (Protameen)
  • 1.500
  • Protachem HCO-40 (Protameen)
  • 1.000
  • Protalan Wax (Protameen)
  • 18.000
  • Protachem CS-50 (Protameen)
  • 4.000
  • Shea Butter
  • 4.000

0

  • Fixate Design Polymer (Lubrizol (Protameen))
  • 1.000
  • Triethanolamine
  • qs
  • Preservative
  • qs
  • Fragrance
  • qs

Procedure

Meter DI water (A1) into main tank, sprinkle Carbopol Ultrez-21 (A2) on top, allow to self-wet (with no agitation). Once phase A is completely wetted out, begin propeller agitation of batch, add phase B ingredients one at a time. Begin heating to 75-80°C. In auxiliary tank, combine all ingredients of phase C, mix and heat 75-80°C, until homogenous. Once both phases are homogeneous, slowly add phase C into main tank with phase AB. Mix until homogeneous, being careful not to aerate the batch. Remove from heat, begin cooling to 50-55°C Add Fixate design polymer (D1) to main. Add triethanolamine (D2) to neutralize batch. Add preservative (D3). Add fragrance (D4)

More Information

Protameen Chemicals, Inc. 973-256-4374 • Fax: 973-256-6764 Email: [email protected] Website: www.protameen.com